FMS Sky Trainer 182 1400mm
Based on the tail registration number N9258, this model is the FMS Sky Trainer 182 1400mm (also distributed by brands like BlitzRCWorks via Banana Hobby). It is a highly popular, 5-channel scale trainer airplane made of durable EPO foam.
📐 Physical Dimensions
- Wingspan: 1,410 mm (55.5 in)
- Overall Length: 1,100 mm (43.3 in)
- Flying Weight: Approximately 1,520 g (53.6 oz)
- Wing Area: 27.0 dm²
- Wing Load: 56.3 g/dm²
⚡ Power & Electronics
- Motor: 3536-KV850 Brushless outrunner
- Speed Controller (ESC): 35A or 40A Brushless ESC
- Servos: 6 x 9g micro servos (Ailerons, Elevator, Rudder, Flaps)
- Propeller: 11x6 3-blade scale propeller with chrome spinner
🔋 Battery & Radio Requirements
- Recommended Battery: 11.1V 3S 2200mAh 25C Li-Po
- Center of Gravity (CG): 60 mm backward from the leading edge of the main wing
- Control System: Minimum 5-Channel Radio Transmitter and Receiver
- Average Flight Duration: 5 to 8 minutes depending on throttle management
✨ Key Features
- Working Flaps: Scale drop-hinge flaps allowing for slow, controlled touchdowns and short takeoffs.
- Navigation Lights: 5 functional LED navigation lights pre-wired into the wing tips, landing gear, and vertical stabilizer.
- Scale Details: Features a clear smoked canopy, steerable nose gear with shock mitigation, a realistic pilot figure, and textured scale control surfaces.
If you are looking to take this model out for a flight, let me know if you need help finding compatible replacement parts, an appropriate LiPo charger setup, or the original factory instruction manual!


