| Module |
Topics Covered |
| Module 1: Beginner Basics (Month 1) |
Overview of Drone Industry: An overall introduction to the drone industry and it's many applications and uses.
|
|
Introduction to Drone Technology: Understanding the components and functions of a drone.
|
|
Safety Procedures: Pre-flight checklists, emergency protocols, and safety guidelines.
|
|
Basic Controls: Learning how to ascend, descend, and hover in a stable manner.
|
|
Simulator Training: Use drone flight simulators for risk-free practice.
|
| Module 2: Fundamental Maneuvers (Month 2) |
Takeoff and Landing: Practice safe takeoffs and landings in open areas.
|
|
Basic Orientation: Understanding the orientation of the drone in relation to the pilot.
|
|
Straight Line Flight: Navigating the drone in a straight line at different altitudes.
|
|
Square Patterns: Learning to fly in square patterns with precision.
|
|
Circles and Loops: Introduction to circular flight patterns and basic loops.
|
|
Figure 8s: Maneuvering the drone in figure 8 patterns.
|
|
Altitude Control: Practice maintaining specific altitudes with precision.
|
|
Dynamic Turns: Introduction to sharper turns and changing directions.
|
| Module 3: Intermediate Skills (Month 3) |
High Altitude Training: Gradual increase in altitude control for more advanced flights.
|
|
Landing on Elevated Platforms: Precise landings on elevated surfaces.
|
|
Obstacle Avoidance: Introduction to avoiding static obstacles during flight.
|
|
Low Altitude Maneuvers: Flying close to the ground with precision.
|
|
Wind Resistance Training: Understanding and managing drone behavior in different wind conditions.
|
| Module 4: Advanced Techniques (Month 4) |
Extended Flight Duration: Increasing flight time and managing battery life.
|
|
Long-Distance Flights: Navigating the drone over longer distances.
|
|
Advanced Obstacle Courses: Negotiating more complex obstacle courses.
|
|
Building Flyovers: Flying around and over structures with precision.
|
| Module 5: Expert Challenges (Month 5) |
Water Crossings: Navigating over bodies of water with safety measures.
|
|
Mountainous Terrain Navigation: Understanding the challenges of flying in mountainous areas.
|
|
Urban Environment Navigation: Maneuvering through urban landscapes and buildings.
|
|
Power Line Navigation: Advanced training near and around power lines.
|
| Module 6: Advanced Techniques Across Modules (Month 6) |
Tunnel Navigation: Flying through simulated or real tunnels.
|
|
Nighttime Operations: Advanced flight training in low-light conditions.
|
|
Emergency Scenarios: Simulate emergency situations and practice appropriate responses.
|
|
Regulatory Compliance: Understanding and adhering to local drone regulations.
|
| Module 7: Advanced Flight Training & Practical Applications (Month 7) |
Flight Planning: Develop skills in planning routes and mission execution.
|
|
Data Analysis: Introduction to analyzing flight data for performance improvement.
|
|
Precision Flying: Training in successfully flying in close quarters
|
| Module 8: FAA Compliance Training (Month 8) |
Part 107 - Overview and Intro Training: Develop skills in planning routes and mission execution.
|
|
Part 107 - Flight Maps: Develop skills in planning routes and mission execution.
|
|
Part 107 - Weather Reports: FAA Drone Flight Certification Training, Practice Exam, and Test Registration
|
|
Part 107 - Test Registration: We register you for your 1st flight certification test.
|
|
Drone Registration: We register your drone with the FAA!
|
| Module 9: Drone Building Program (Month 9) |
Defining Use Case and Airframe selection: We define specifications for a custom built drone and build it from scratch.
|
|
Component Selection: Deciding on the flight controller, motors, props, batteries, and doing AUW calculations
|
|
Airframe & Component Build: We assemble the airframe & start putting all components together.
|
|
Configuration & Tuning: Learn to configure and tune the drone's flight stabilization control unit.
|
