Best Buy SFV โ€“ Dell OptiPlex Selection Guide

This guide is for buying a refurbished Dell OptiPlex at Best Buy in the San Fernando Valley (Pacoima, Northridge, Sherman Oaks, Woodland Hills) that:

Northridge Best Buy Address: 19350 Nordhoff Way, Northridge, CA 91324

  • Supports NVMe M.2 SSD (ADATA Legend 700)
  • Supports 2.5" SATA SSD
  • Has more than 8GB RAM (preferably 16GB)
  • Costs $300 or less
  • Offers best performance within budget

Form Factors That Work

  • Tower (full size) โ€“ always supports NVMe + SATA
  • SFF (Small Form Factor) โ€“ supports NVMe + SATA

Micro, USFF, and UFF units never support both NVMe and 2.5" SATA for your needs โ€“ avoid them.

Models You Should Buy (If Available)

1. Dell OptiPlex Tower โ€“ 6th Gen Intel (i5-6xxx or i7-6xxx)

This is the best possible choice under $300.

  • Has NVMe M.2 slot
  • Has 2.5" SATA SSD bay
  • Typically comes with 16GB DDR4 RAM
  • Best airflow and longevity
  • Easiest to work on
  • Most similar to the OptiPlex 3060 being replaced
  • Highest performance in your price range

If you see a box labeled something like:
Dell โ€“ Refurbished โ€“ OptiPlex Tower โ€“ Intel i5-6th Gen โ€“ 16GB RAM โ€“ 256GB SSD
this is the one to buy.

2. Dell OptiPlex SFF โ€“ 6th Gen Intel (i5-6xxx or i7-6xxx)

This is the second-best choice if the tower is not available.

  • Has NVMe M.2 slot
  • Has 2.5" SATA SSD bay
  • Typically comes with 16GB DDR4 RAM
  • Good performance
  • Smaller footprint

Downside: interior is tighter and airflow is slightly worse than the tower, but still a solid choice.

Models You Must Avoid

Do not buy any of the following, even if they look good on paper:

  • OptiPlex 7060 Micro โ€“ NVMe only, no 2.5" SATA bay
  • OptiPlex 3060 Micro โ€“ NVMe only, no 2.5" SATA bay
  • OptiPlex 9020 (USFF/SFF/Tower) โ€“ no NVMe support (4th-gen era), DDR3, older platform
  • OptiPlex 7070 UFF โ€“ no internal drive bays
  • Any 4th-gen OptiPlex โ€“ no NVMe, DDR3, lower performance
  • Any unit labeled "Micro", "USFF", or "UFF" โ€“ too limited for your NVMe + SATA requirement

Store Locations (San Fernando Valley)

  • Pacoima Best Buy
    13510 Paxton St, Pacoima, CA 91331
  • Northridge Best Buy (Nordhoff)
    19350 Nordhoff Way, Northridge, CA 91324
  • Northridge Best Buy (Rinaldi)
    19929 Rinaldi St, Northridge, CA 91326
  • Sherman Oaks Best Buy
    4500 Van Nuys Blvd, Sherman Oaks, CA 91403
  • Woodland Hills / Canoga Park Best Buy
    21601 Victory Blvd, Canoga Park, CA 91303

What To Say To the Best Buy Employee

When you walk into any of these stores, you can say:

"I need a refurbished Dell OptiPlex Tower or SFF, 6th-gen Intel (i5 or i7), with at least 16GB RAM, and not Micro, USFF, or UFF."

How To Read the Box Label

Accept the unit if the label includes:

  • OptiPlex Tower or OptiPlex SFF
  • Intel i5-6xxx or Intel i7-6xxx
  • 16GB RAM
  • Any SSD size (e.g., 256GB SSD) โ€“ you will be swapping in your own drives

Reject the unit if the label includes:

  • Micro
  • USFF
  • UFF
  • 9020
  • 4th Gen (e.g., i5-4xxx)
  • Any wording like "Ultra Small Form Factor" or "Ultra Form Factor"

Final Recommendation

If any of the SFV Best Buy stores have:

Dell OptiPlex Tower โ€“ i5-6th Gen โ€“ 16GB RAM โ€“ 256GB SSD

buy that immediately.

If the tower is not available, your next best option is:

Dell OptiPlex SFF โ€“ i5-6th Gen โ€“ 16GB RAM

Both will support your NVMe M.2 SSD and your 2.5" SATA SSD and give you solid performance under $300.